High Performance Engine Treatment Kit for Outboard Motors - 4 Stroke Engine Additive for Boats Over 300HP | Improves Fuel Efficiency & Extends Engine Life

Product Description

(1) Microlon first chemically cleans the metal surface Microlon is added to the crankcase and fuel tank. It is very important to follow treatment instructions for your specific engine. Microlon contains a powerful chemical solution that penetrates and thoroughly cleans an engine's internal metal surfaces before impregnating them. Carbon, varnish, dust, metal particles and other deposits are dissolved and suspended in the motor oil and fuel. leaving the metal surface clean. The contaminants are flushed out at the next regularly scheduled servicing. This cleaning process is critical for the proper bonding between the pore structure of the metal and Microlon. (3) A permanent lubricant film penetrates and bonds with the metal surface Microscopic fractured resin particles are impregnated into the metal pores and become an integral part of the metal surfaces they protect. These particles actually mechanically lock into the matrix of the metal asperities and coat the surface. The resulting lubricant film is resistant to chemicals and capable of withstanding temperatures far in excess of normal engine operation. The Microlon film has one of the lowest coefficients of friction of any material known to man, yet it is chemically inert and will not burn out, gum up or adversely effect anything in your engine (2) The metal is saturated with inhibitors and anitoxidants Microlon contains special antioxidants and inhibitors. These chemical compounds prevent engine damaging, because they work through the fuel as well as the oil, both top and bottom ends of an engine are treated. This part of the treatment also contributes to smoother operation and longer engine life. Microlon does not replace any of the oil in the crankcase. (4) After treatment, metal to metal contact becomes Microlon to Microlon contact Microlon virtually eliminates raw metal-to-metal contact and replaces it with Microlon-to-Microlon contact. This changes the whole internal environment of an engine as metal surface imperfections are virtually eliminated. Friction, heat and wear are decreased while engine efficiency is increased, and your engine will never suffer from another “dry start” when all the other lubricants have settled to the bottom of the sump. The two cubes in the illustration show how two pieces of metal treated with Microlon work together. Both surfaces now have new load-bearing surfaces that are almost friction free. The particles in the Microlon coating have tremendous lubricating properties. Each surface is “dynamic” which means the Microlon resins remain elastic under normal operating conditions and temperatures.